-
About Us
-
-
-
-
Service
-
Contact Us
Detailed introduction of technical parameters of simulated transportation vibration table
Release time:
2024-08-06
Author:
Source:
The simulated transportation vibration table is a device that uses electric, electro-hydraulic, piezoelectric or other principles to obtain mechanical vibration. The principle is that the excitation signal is input to a coil placed in a magnetic field to drive the worktable associated with the coil. The electric vibration table is mainly used for vibration measurement above 10Hz, and the maximum pressure of 200N can be excited. In the frequency range below 20Hz, the electro-hydraulic vibration table is often used, and the nature of the vibration signal is controlled by the electric servo system. The hydraulic drive system can give large displacement and impact force. For different test objects and technical indicators, attention should be paid to the selection of vibration tables with different structures and excitation ranges.
The simulated transportation vibration table is a device that uses electric, electro-hydraulic, piezoelectric or other principles to obtain mechanical vibration. The principle is that the excitation signal is input to a coil placed in a magnetic field to drive the worktable associated with the coil. The electric vibration table is mainly used for vibration measurement above 10Hz, and the maximum pressure of 200N can be excited. In the frequency range below 20Hz, the electro-hydraulic vibration table is often used, and the nature of the vibration signal is controlled by the electric servo system. The hydraulic drive system can give large displacement and impact force. For different test objects and technical indicators, attention should be paid to the selection of vibration tables with different structures and excitation ranges.
1. simulation transport vibration table box parameters
(1) Digital instrument display vibration frequency
(2) synchronous noise belt drive, very low noise
(3) The trial clamping adopts guide rail type, which is convenient and safe to operate.
(4) The base of the machine adopts heavy-duty channel steel with damping rubber pad, which is easy to install and runs smoothly without installing anchor screws.
Requirements of 2. Simulation Transportation Vibration Table Test Standard for Equipment
5. Effective table top: 1000 * 1200mm (length * width)
6. Time setting range: 0seconds ~ 99hour
7. Motor power: 1HP
8. Speed regulation mode: DC speed regulation
Key words:
Previous Page:
Next page:
Wanli Vibrating Machinery
Address: 168 Jianghai West Road, Hai 'an Town, Hai 'an City, Jiangsu Province
Telephone: 86-513-88812579 / 88859262
Contact: Manager Xu 86-18112281088
Fax: 86-513-88814780
Zip Code: 226600
E-mail: info@wlzd.cn
Focus on Wanli Machinery
Copyright © 2024 Haian Wanli Vibrating Machinery Co., Ltd. All Rights Reserved