26

2024-08

Vibrating screen installation and commissioning should pay attention to those problems

Vibrating screen plays a very important role in mine production. At the beginning of equipment production, if the installation and debugging are not standardized, hidden dangers will be buried for future production. Therefore, it is very important to master the precautions and operation skills of vibrating screen installation and debugging.

2024-08-26

23

2024-08

How to do if the material of the vibrating screen deviates

If the material deviation phenomenon occurs in the screening process of vibrating screen, it will affect the screening efficiency and screening accuracy. The reasons for the deviation of the material of vibrating screen are as follows:

2024-08-23

21

2024-08

How to solve the problem of too much noise of vibrating screen

Vibrating screen plays a very important role in the mining industry, but it is often accompanied by noise in the production process.

2024-08-21

19

2024-08

5 main differences between circular vibrating screen and linear screen

The circular vibrating screen is actually a kind of centrifugal force generated by the rotation of the eccentric block in the vibrator, so that the screen box, vibrator and other parts of the forced continuous circle or approximate circle movement. The material is continuously thrown on the inclined screen surface with the screen box; stratification occurs when thrown up; the particles will penetrate the screen when falling down. Linear vibrating screen is the use of vibration motor excitation force, so that the material is thrown up on the screen and forward linear motion, the material from the feeder evenly into the feed inlet of the screening machine, through the multi-layer screen to produce several specifications of the sieve, sieve, respectively, discharged from their respective exports, in the mining industry is widely used.

2024-08-19

16

2024-08

X-sand aggregate industry screening weapon

Aggregate is the world's most mined mineral resources, and it is an indispensable material basis for supporting infrastructure. With the introduction of the concept of green environmental protection, the sand and gravel aggregate industry has higher and higher requirements for environmental protection, efficiency and energy saving in the production process, and the traditional large circular vibrating screen can no longer meet the production needs of customers.

2024-08-16

14

2024-08

WXZG type double mass vibrating feeder

Working principle: The equipment adopts the principle of double-mass near-resonance inertial vibration. By the rubber shear to force, the main vibration shear glue without frequent replacement. It can adopt hanging, seat type and other configurations, which is convenient for process layout and space utilization. The equipment is composed of three parts: a groove body, a suspension, and an excitation part. Single or double rows of shear rubber springs are arranged up and down, and the lower pressure plate is connected to the balance body by bolts, and then the left and right side plates are connected to the groove body. A vibration motor is installed on the back vertical plate of the balance body. The eccentric force of the vibration motor is transmitted to the tank body through the shear rubber block fixed on the balance body and the pressure plate up and down, so as to realize uniform feeding.

2024-08-14

12

2024-08

Distribution sieve-y series sieve machine adopts innovative imitation artificial screening principle

The distribution sieve-y series sieve machine adopts the innovative artificial sieving principle, which perfectly combines the two actions of "sieving" and "jolting", and effectively solves the screening problem of fine and ultra-fine materials. Distribution sieve one Y can provide excellent screening effect.

2024-08-12

09

2024-08

Focus on screening, committed to environmental protection a multiple frequency sieve C, how much do you know?

The multi-frequency sieve-C is a special dry screening equipment for bulk, wet and viscous fine materials (such as raw coal, mineral material, lignite, bauxite, coke, etc.). It is used for lump ore, coke, coke powder, coke, pulverized coal, limestone, etc. with material grain size above 3mm and water content <20%. It can also be applied to the screening of all kinds of fine materials, usually refers to the screening material of> 1.5m, temperature <70 ℃, widely used in coal, chemical industry, mining, electric power, coke, metallurgical building materials and other fields.

2024-08-09

08

2024-08

What is the difference between a mechanical sinusoidal vibration table and an electromagnetic high-frequency vibration test bench

The requirements of mechanical sinusoidal vibration table and electromagnetic high-step vibration test bench are different. According to the above questions, it belongs to mechanical sinusoidal vibration table;

2024-08-08

07

2024-08

What is the maximum acceleration of the vibration table

From the manufacturer's point of view, the random thrust is the same as the sinusoidal thrust, so it can be considered that the maximum random acceleration in the airspace of the electric platform is the same as the maximum acceleration in the sine. If you look at the instructions carefully, it is introduced that there are conditions to reach the maximum random thrust. The random thrust is defined as M * Grms. The random thrust marked by the general vibration table =(0.8~1.0) sinusoidal thrust, calculated by 3 times, the random maximum thrust =(2.4~3.0) sinusoidal thrust. Random thrust is tested under certain test conditions, that is, in the high frequency range, if you do low frequency test to play a larger discount. According to JJG 948-1999, the test conditions in China are: 20~100Hz 6dB/Oct 100~2000 flat spectrum

2024-08-07

Copyright © 2024 Haian Wanli Vibrating Machinery Co., Ltd.  All Rights Reserved

Business License